1/2" Impact Driver Speed Collar 10" Impact Extension Bar | Adjustable 3-Position Aluminum Spinning Handle, Cr-Mo Steel Extension = Fully Impact Grade (LX-116)

The separate aluminum spinning handle provides a grip for stabilizing the extension. The bar itself carries a 1/2-inch square-drive connection.

The single extension is 10 inches long. This model combines one long bar with an adjustable collar, rather than a three-length assortment.

The collar is described as adjustable to three positions. Confirm the correct adjustment procedure before running your tool.

LX-116 ends in a 1/2-inch square drive. A 3/8-inch socket is not a direct drive match simply because the handle can move.

Its input is for a matching 1/2-inch square-drive tool. The spinning handle does not provide a hex-shank input.

Check room for the 10-inch bar, socket and separate handle. No universal engine-bay or wheel-recess clearance is documented for this assembly.

LX-116 specifies heat-treated chrome molybdenum alloy steel for the impact-grade bar. The handle is a separate anodized aluminum component.

The aluminum spinning handle provides a grip for stabilizing the extension. It is not a second socket-drive output.

No quantified vibration reduction is supplied. The stabilization feature does not establish a measured exposure reduction or guaranteed fatigue benefit.

Ask Lexivon to confirm the operating load for the 10-inch half-inch extension and your tool before high-torque work. The spinning collar does not establish a load rating.

No calibrated torque scale or measuring function is specified. It is a grip around an extension, not a torque-reading instrument.

A pin hole is described for use with pin-and-O-ring retention. The available inventory does not confirm those pieces are supplied.

LX-116 provides one 10-inch bar and a three-position spinning handle. LX-115 provides three plain 1/2-inch drive bars at nominal 3, 6 and 8 inches.

The handle is anodized aluminum, and the bar has manganese phosphate treatment. The two components have different surface treatments.

Ask Lexivon whether a compatible replacement collar is available before buying if replaceable handle parts are essential to your work.

The collar changes the grip position, not the square connection. The tool and socket still need matching 1/2-inch drive connections.

LX-116 is listed as the single 10-inch extension with its handle. A socket assortment and the 3, 6 or 8-inch bars are not listed as included.

Register online within 90 days of purchase. Without registration the standard term is 12 months, and industrial use is not covered under the policy.

Confirm the 1/2-inch drive connections seat securely and the handle is in its intended position. Ask Lexivon for the correct adjustment procedure if its operation is unclear.

Stop using the assembly and ask Lexivon for guidance on the loose or damaged collar. Confirm compatible replacement-part availability before attempting a repair.

The bar has a pin hole, but supplied hardware is not confirmed. Obtain the correctly specified retention arrangement for your tool rather than assuming the package contains it.

No. The handle's movement does not establish the condition of the load-carrying bar. Stop using a visibly damaged extension and seek support.

Commercial use has 12 months coverage and cannot be extended. Industrial use is excluded; lifetime registration does not override those usage terms.

No. Coverage is for material and workmanship defects. Normal wear, misuse, modification and damage from non-original parts are excluded; Lexivon determines the resolution under its policy.