Impact Grade Socket Adapter Set, 3" Extension Bit With Holder | 3-Piece 1/4", 3/8", and 1/2" Drive, Adapt Your Power Drill To High Torque Impact Wrench (LX-101)

Its short adapters link a 1/4-inch hex holder or drill chuck to sockets. The three square outputs are 1/4, 3/8 and 1/2 inch.

Yes. This set supplies the nominal 3-inch length in all three square-drive sizes; check whether that reach clears your driver body and surrounding parts.

Use the adapter marked 1/4 inch square drive for that socket. The 10 mm opening fits the fastener; it is separate from the socket drive connection.

The input on LX-101 is a hex shank, not a female square. Select a square-input accessory for a square-drive gun.

They are socket adapters, not cutting bits. Use a correctly sized socket on the square end and the 1/4-inch hex shank in a compatible holder.

Check the socket opening and drive first, then the job clearance and tool capability. A vehicle name does not establish that these short hex adapters suit its wheel fasteners.

It holds one adapter for each of the 1/4, 3/8 and 1/2-inch square drives. All three adapters have the same 1/4-inch hex input.

The listed adapters themselves are nominally 3 inches long. LX-101 is not described as three short adapters plus a separate 3-inch extension bar.

LX-101 lists three socket adapters and an organizer. A separate magnetic bit holder is not in its listed contents; LX-104 is the model that adds one.

No unlimited rating is established for LX-101. The 1/2-inch socket output still depends on its 1/4-inch hex shank and the rest of the tool setup.

It changes the connection to a socket. No added impact mechanism or torque amplification is documented for the LX-101 adapter.

Keep LX-101 use within 540 in-lb (45 ft-lb) as a conservative torque limit. Match the hex holder and square output to your tools; a larger socket does not increase that allowance.

LX-101 supplies nominal 3-inch adapters and LX-102 supplies 6-inch adapters, both in three drive sizes. Choose LX-102 when your job needs the longer listed reach.

LX-101 uses heat-treated chrome vanadium steel for its short socket adapters.

Black phosphate treatment supports corrosion resistance. It does not guarantee that a short adapter can never rust or withstand every abuse.

A standard LX-101 holder has one 1/4, one 3/8 and one 1/2-inch square output. Check those three markings if one size seems to be absent.

Yes. LX-101 lists the three adapters and holder; select your own socket opening and compatible power tool for the job.

Lifetime coverage when you register online within 90 days of purchase; 12 months standard without registration. Coverage is for defects, subject to the published usage restrictions.

Read the 1/4, 3/8 or 1/2-inch square-output marking, then seat a matching socket. The opposite 1/4-inch hex shank must fit your tool holder.

Stop using that adapter and contact Lexivon. A twisted or broken hex neck cannot be treated as sound merely because the socket end remains intact.

The LX-101 inventory requires one of each square-output size. Contact the seller or Lexivon about the missing size rather than forcing an incorrectly sized adapter.

Check the matching square drive and actual detent engagement. If the socket will not remain securely seated, stop using that connection and seek Lexivon guidance.

Commercial use has 12 months coverage and cannot be extended. Industrial use is excluded; lifetime registration does not override those usage terms.

No. Coverage is for material and workmanship defects. Normal wear, misuse, modification and damage from non-original parts are excluded; Lexivon determines the resolution under its policy.