Impact Grade Socket Adapter Set, 6" Extension Bit With Holder | 3-Piece 1/4", 3/8", and 1/2" Drive, Adapt Your Power Drill To High Torque Impact Wrench (LX-102)

It places the socket farther from the driver than the 3-inch set. Confirm the longer adapter can reach the fastener without the driver body obstructing access.

The three 6-inch adapters end in 1/4, 3/8 and 1/2-inch squares. Choose the output matching the drive recess in your socket.

The documented input is a 1/4-inch hex shank. Your quick-change holder must accept that shank; its hex size is distinct from the three socket-drive sizes.

The nominal 6-inch length can provide reach beyond a shorter bit. Verify the actual clearance along the adapter and around the socket for your particular bolt.

LX-102 has hex inputs for a drill chuck or bit holder. A ratchet with a square drive needs a square-input extension instead.

They mark the socket drive connections. A separate socket must provide the opening required by your fastener, regardless of the adapter's 6-inch length.

The adapters are nominally 6 inches long. Ask Lexivon for the exact dimension or tolerance when your clearance depends on it.

Yes. The input is 1/4-inch hex on each; only their socket outputs differ. The listed output choices are 1/4, 3/8 and 1/2 inch square.

No higher operating load is established for LX-102 merely because it is longer. Confirm the adapter-size limit instead of treating reach as a torque rating.

A spring-loaded detent ball retains the socket at the square output. Check engagement with your actual socket before running the driver.

No. All three LX-102 adapters have a 1/4-inch hex shank. A 7/16-inch holder requires a different shank size, even when the square output matches your socket.

The recommended use torque for the LX-102 socket adapters is 650 in-lb, about 54 ft-lb. The extra 6-inch reach does not grant a higher load allowance; check tool output before use.

LX-102 gives nominal 6-inch reach; LX-101 gives 3-inch reach. Both are three-piece hex-to-square sets with 1/4, 3/8 and 1/2-inch socket outputs.

Yes. LX-102 uses heat-treated chrome vanadium construction and black phosphate treatment.

No separate magnetic bit holder is listed. The supplied holder organizes the three long socket adapters.

It is listed as a three-size set, not a single adapter. The nominal 6-inch length is supplied in each square-drive size.

The set includes an organizer holder. Supply your own sockets and power tool; a fitted carrying case is not included.

Register LX-102 online within 90 days of purchase for lifetime coverage. Without registration, standard coverage is 12 months for defects in material and workmanship.

Stop the tool and check secure seating and the adapter condition. If the adapter appears bent or shakes after proper seating, stop using it and contact Lexivon.

No. Remove the damaged piece from service and ask Lexivon for support. The fact that another adapter in the set still works does not make the snapped piece usable.

Each LX-102 set should contain one 1/4, one 3/8 and one 1/2-inch square output. Photograph the received pieces and contact Lexivon if a duplicate leaves a size missing.

Seat the socket on its matching square output and verify the detent engages. The organizer holder is for storage, not a substitute for checking retention at the tool connection.

Commercial use has 12 months coverage and cannot be extended. Industrial use is excluded; lifetime registration does not override those usage terms.

No. Coverage is for material and workmanship defects. Normal wear, misuse, modification and damage from non-original parts are excluded; Lexivon determines the resolution under its policy.