6-Piece Impact Grade Socket Adapter Set - 3" & 6" Extension Bit With Holder | 1/4", 3/8", and 1/2" Drive, Adapt Your Power Drill To High Torque Impact Wrench (LX-105)

It supplies nominal 3 and 6-inch adapters. Each length group includes 1/4, 3/8 and 1/2-inch square outputs, making six adapters total.

Yes. For each square output, LX-105 provides a short 3-inch adapter and a longer 6-inch adapter, both with a 1/4-inch hex input.

Use the short or long adapter with the same square-output marking. The 3 and 6-inch groups both cover the three listed socket drives.

Check for a compatible 1/4-inch hex holder. The socket connection remains square, so match the selected adapter output to the drive recess in your socket.

No. LX-105 is the 3 and 6-inch assortment. The nine-piece LX-106 kit adds the nominal 12-inch group.

Choose the square output matching your socket's drive. A longer adapter with the wrong output is not a direct substitute for the correct drive size.

There are three drive sizes, repeated across two lengths. The six-piece count is not six distinct square-drive dimensions.

A spring-loaded detent ball retains the socket. Verify engagement on the selected 3 or 6-inch piece before use; neither length is guaranteed drop-proof.

The kit includes organizer holders for the two length groups. A hard carrying case is not included.

No operating-capacity advantage is established for the 6-inch group over the 3-inch group. Length choice provides reach, not a published load increase.

No measuring function is specified for LX-105. Choose the adapter for the connection and use appropriate separate torque equipment where the fastener requires measured tightening.

A separate magnetic bit holder is not in the six-adapter inventory. LX-105 combines two lengths of socket adapters instead.

LX-101 gives three adapters at nominal 3 inches. LX-105 adds another three at 6 inches, retaining 1/4, 3/8 and 1/2-inch square outputs at each length.

LX-105 uses heat-treated chrome vanadium alloy steel for the adapter set, with black phosphate corrosion-resistance treatment.

LX-105 is made in Taiwan.

Keep either length group in LX-105 within the recommended 650 in-lb, about 54 ft-lb. Choose between 3 and 6 inches for reach, and use a matching socket on the square output.

The kit image shows separate holders for the 3 and 6-inch groups. Each group carries all three output drive sizes, so check its contents before separating it.

Register within 90 days of purchase to activate lifetime coverage for LX-105. Without registration, standard coverage is 12 months for material and workmanship defects.

Each length group should have 1/4, 3/8 and 1/2-inch square outputs. Confirm both the short 3-inch group and longer 6-inch group before selecting an adapter.

Stop using that connection and inspect the drive match and detent. Seek support if retention is insecure; do not treat an improvised tape repair as verified retention.

Set the broken piece aside and inspect the other piece's condition and connection separately. One damaged adapter does not establish that another is safe to use.

The listed organizers are holders for the two length groups. A hard carrying case is not in LX-105's documented inventory; contact the seller about any different package representation.

Commercial use has 12 months coverage and cannot be extended. Industrial use is excluded; lifetime registration does not override those usage terms.

No. Coverage is for material and workmanship defects. Normal wear, misuse, modification and damage from non-original parts are excluded; Lexivon determines the resolution under its policy.