Six Openings In Three Flip Sockets
Its metric openings are 17, 19 and 21 mm; its inch openings are 3/4, 13/16 and 7/8 inch. Pick the one matching the actual wheel nut.

LX-111 is the six-opening lug-nut kit with three flip sockets, a nominal 3-inch extension and case. It covers 17, 19 and 21 mm plus 3/4, 13/16 and 7/8 inch on a 1/2-inch square drive; check wheel clearance and tool seating.
Its metric openings are 17, 19 and 21 mm; its inch openings are 3/4, 13/16 and 7/8 inch. Pick the one matching the actual wheel nut.

Heat-treated chrome molybdenum alloy steel. Manganese phosphate treatment is listed for corrosion resistance. Confirm the operating load for your application.

Three dual-end sockets covering 17, 19 and 21 mm plus 3/4, 13/16 and 7/8 inch, a 3-inch extension bar and storage case.

Choose by connection size, socket opening, reach and working clearance.
| Job or attachment | Works | What to check |
|---|---|---|
| Listed drive connections | Yes, when sizes match | 1/2-inch square drive. Confirm secure seating. |
| Listed lug-nut openings | Yes, with correct clearance | 17, 19, 21 mm; 3/4, 13/16, 7/8 inch. No 22 mm opening is listed. |
| Automotive and maintenance work | Application dependent | Match the socket opening, working space and tool capacity to the fastener. |
| Other drive sizes | No assumed direct fit | Check the input and output drive separately before buying. |
| Unidentified vehicle or tool model | Not a verified fit guarantee | Confirm the required fastener size and actual tool connection. |
| Unspecified high-torque work | Operating limit needs confirmation | Ask Lexivon for the size-specific operating limit before high-load use. |
Its metric openings are 17, 19 and 21 mm; its inch openings are 3/4, 13/16 and 7/8 inch. Pick the one matching the actual wheel nut.
Yes. Three dual-end sockets provide the six sizes, alongside the nominal 3-inch extension and fitted case.
Verify the RV wheel-nut opening is one of the six supplied sizes, then check recess clearance and the 1/2-inch tool connection. Vehicle type alone does not establish fit.
Check socket outside dimensions and required depth against your aftermarket wheel recess. Confirm clearance around the complete socket and extension before use.
22 mm is absent from this six-opening kit. The eight-opening LX-110 includes that metric size.
Yes. The supplied extension has a 1/2-inch square input for a matching torque wrench and reaches the drive inside the flip socket. Check secure seating on the wrench and socket before use.
Each socket supplies two openings, allowing six sizes in three sockets. Remove and turn it over to use its other opening.
LX-111 is full impact grade with heat-treated chrome molybdenum steel. That designation does not supply an unlimited operating-load rating.
No. Its inch sizes stop at the listed 3/4, 13/16 and 7/8-inch openings. Choose another socket if your fastener requires 15/16 inch.
Both are separately listed in LX-111. Use the fastener's specified opening and a snug fit rather than substituting based on their similar dimensions.
A wheel-specific locking key is not included. Check the required security pattern; ordinary lug sockets do not establish fit for every locking fastener.
Do not assume unlimited service life from impact-grade construction. Check the tool condition before use and follow the commercial warranty restriction.
LX-111 has six openings in three sockets. LX-110 has eight in four and adds 22 mm and 15/16 inch. Both list 1/2-inch drive and a 3-inch extension.
The sockets have laser-etched sizes. Check that each marking is readable before selecting an opening; no lifetime legibility guarantee is provided.
LX-111 uses heat-treated chrome molybdenum alloy steel and manganese phosphate coating. Those materials do not guarantee that wear or rust is impossible.
LX-111 contains three flip sockets for six openings, not the four sockets and eight openings of LX-110. Check the smaller inventory when unpacking.
A fitted case holds the three sockets and extension. Confirm those four working pieces are present before storing the kit.
No. Commercial use is limited to 12 months and cannot be extended. Lifetime eligibility for LX-111 requires registration within 90 days and does not override that restriction.
Set that extension aside if the socket will no longer stay seated. Contact Lexivon for guidance before putting the six-size kit back into service.
No. Both ends share one socket body. Stop using the damaged piece and contact Lexivon instead of assuming the uncracked-looking end is independent.
Confirm the opening size before use and contact Lexivon if you cannot identify it reliably. Do not guess from appearance or use a socket with unreadable markings.
Compare with the documented three flip sockets and one extension, then contact the seller or Lexivon about the discrepancy. LX-111 does not require a fourth flip socket.
Commercial use has 12 months coverage and cannot be extended. Industrial use is excluded; lifetime registration does not override those usage terms.
No. Coverage is for material and workmanship defects. Normal wear, misuse, modification and damage from non-original parts are excluded; Lexivon determines the resolution under its policy.
Download the documents for LX-111. Browse all manuals