Metric Sizes From 2 To 14 mm
13 metric hex bit sockets covering 2-14 mm. Match the fastener, tool connection and available clearance before applying force.

LX-141 is a 13-piece metric hex bit socket set covering 2-14 mm, including 2.5 and 5.5 mm. Three square-drive groups and the supplied case suit buyers choosing exact metric sizes for bicycle and mechanical fasteners; check the job's torque and clearance.
13 metric hex bit sockets covering 2-14 mm. Match the fastener, tool connection and available clearance before applying force.

Metric sizing includes 2.5 and 5.5 mm as well as whole-millimeter sizes.

Heat-treated S2 alloy steel bits. Chrome vanadium sockets connect them to manual drive tools.

Use only accessories rated for the tool in use. A material or finish claim does not establish an impact rating or a universal torque limit.

The package supplies 13 bit sockets and a storage case. Check every included size when unpacking. No ratchet or torque wrench is listed as included.

Match the profile, exact size, tool connection and available clearance. A vehicle name alone does not establish fit.
| Fastener or tool | Fit | What to check |
|---|---|---|
| Matching metric hex fasteners | Yes, in the listed sizes | Check the full size inventory below and seat the correct profile completely. |
| Other fastener profiles | No verified fit | SAE hex, Torx and XZN profiles require the matching tool. |
| Manual ratchets and torque tools | With matching connection | Match the square drive to each socket; fastener size and drive size are different. |
| Powered impact tools | No rating established here | Use only accessories explicitly rated for the powered tool and its torque. |
| A vehicle make or model | Conditional | Check the actual fastener profile, size and clearance; a vehicle name is not a fit guarantee. |
| High-torque or confined work | Requires verification | No per-size torque limit or guaranteed access dimension is verified; check the service procedure. |
Yes, when the fastener requires an included metric hex size and the drive tool and torque range suit the job. Use the bicycle maker's specification, not a general bicycle torque value.
A 9 mm metric hex socket is included on a 3/8-inch drive. It can serve a brake fastener that specifically requires that profile and size; verify the vehicle service procedure before using it.
1/4 inch: 2, 2.5, 3, 4, 5, 5.5, 6 mm; 3/8 inch: 7, 8, 9, 10, 12 mm; 1/2 inch: 14 mm.
Choose the fastener's specified size and units. Metric sizing includes 2.5 and 5.5 mm as well as whole-millimeter sizes. A near match is not a verified correct fit.
No. The listed metric sizes are 2, 2.5, 3, 4, 5, 5.5, 6, 7, 8, 9, 10, 12 and 14 mm. The published 2-14 mm range does not include every intermediate size.
No. The 4 mm bit socket has a 1/4-inch square recess. The 3/8-inch drive group starts at 7 mm; arrange a correctly rated connection rather than forcing the ratchet into the smaller recess.
The 14 mm piece is the only 1/2-inch drive bit socket in LX-141. Match it with a 1/2-inch drive tool suitable for the equipment's torque specification.
Use the 14 mm piece and the other twelve sockets with suitable manual torque tools. Confirm an explicit rating for the exact socket and powered tool before impact use.
The working hex bits are heat-treated S2 alloy steel, while their square-drive socket bodies are chrome vanadium steel. Those are separate material descriptions, not a per-size torque specification.
It includes 2.5 and 5.5 mm metric hex bits. There is no 3.5 or 4.5 mm piece in the thirteen-size inventory; choose by the required size rather than rounding to a whole millimeter.
Check access with the assembled socket or choose a tool designed for that space. Removing or altering the bit is not an approved way to shorten this set, and modification is excluded from warranty coverage.
The metric bits have zinc phosphate treatment and the socket bodies have chrome plating. Keep the set clean and dry; those finishes do not guarantee corrosion immunity during wet storage.
LX-141 supplies 13 metric hex sizes from 2 to 14 mm. LX-142 supplies 13 SAE hex sizes from 5/64 to 9/16 inch. Match the fastener's specified units rather than substituting a nearby size.
The published contents list thirteen bit sockets and a carry case, without drive adapters. A buyer needing several ratchet connections must check the 1/4-, 3/8- and 1/2-inch groups and obtain suitable connections separately.
Lifetime coverage when you register online within 90 days of purchase; 12 months standard without registration. Commercial use has 12 months of coverage and cannot be extended; industrial use is not covered. Coverage is for defects in materials and workmanship, excluding normal wear, misuse, modification and non-original parts.
Yes, if those sizes fit the task: LX-144 lists 15, 17 and 19 mm in addition to the metric sizes covered here. LX-141 ends at 14 mm and does not supply those larger metric pieces.
Individual LX-141 bits are not offered for separate retail purchase. For a missing 3 or 6 mm metric hex piece, ask Lexivon whether the correct spare is available; any warehouse exception depends on availability, and lost pieces are not covered defects.
Use LX-141 as the model number in place of the missing serial number when completing registration. Keep your proof of purchase; contact Lexivon if the form still will not accept the details. Register within 90 days of purchase for lifetime coverage.
Read the fastener specification and choose that exact metric value. The inventory includes both 5 and 5.5 mm on 1/4-inch drives; do not choose the larger tip to compensate for a loose or worn fit.
Stop using the damaged piece and contact Lexivon with the model, issue description and clear photos. A break alone does not establish a covered defect; Lexivon assesses warranty eligibility.
Both 5 and 5.5 mm should be present once in the metric inventory. Photograph the case and markings and contact Lexivon about the duplicated and missing sizes; substituting 5.5 mm does not complete a job requiring 5 mm.
Do not force a twisted small hex tip into a fastener. These sizes are included for exact metric fit, and deformation changes that fit. Stop using the affected piece and ask support about the appropriate replacement or next step.
No. Use it for fastening with a suitable drive tool. Do not use a socket as a hammer, chisel or for other non-fastening tasks.
No. Coverage excludes normal wear, misuse, modification and damage from non-original parts. Commercial use is limited to 12 months without extension; industrial use is excluded. Torque-wrench recalibration is also excluded.
Download the documents for LX-141. Browse all manuals