Half-Inch Drive For 30-210 Ft-Lb Jobs
A 1/2-inch drive and 30-210 ft-lb range suit compatible wheel and workshop fasteners. Check torque, direction and space before selecting LX-TW12.
- 1/2 inchsquare drive
- 30-210 ft-lbrange
- 24 teethratchet

LX-TW12
LX-TW12 is a rubber-grip 1/2-inch drive click torque wrench for wheel and workshop tightening from 30 to 210 ft-lb (40.7-284.7 Nm). It measures in either direction and uses a twisting collar to retain the setting; check clearance for its 19.4-inch length.
A 1/2-inch drive and 30-210 ft-lb range suit compatible wheel and workshop fasteners. Check torque, direction and space before selecting LX-TW12.

Read 1 ft-lb micrometer steps, turn the collar left to unlock and right to lock, and stop at the first torque impulse. The ratchet has 24 teeth.

LX-TW12 includes the 1/2-inch drive wrench, storage case, operator manual and calibration certificate. Select a socket that fits your fastener separately.

Match the required torque, measurement direction, square drive and working space to the equipment specification.
| Job or attachment | Works | What to check |
|---|---|---|
| Wheel and workshop fasteners requiring 30-210 ft-lb | Yes, when specification fits | Clockwise and counterclockwise tightening within 30-210 ft-lb; follow the equipment maker's torque value. |
| 1/2-inch drive sockets | Yes | Match the socket opening to the fastener and allow space for the wrench. |
| 3/8-inch drive sockets | No direct fit | Match the square drive rather than the socket opening size. |
| Fasteners below 30 ft-lb | No | Use a lower-range torque tool. |
| Fasteners above 210 ft-lb | No | Use a higher-range torque tool. |
| Left-hand threaded fasteners | Yes, within range | Counterclockwise accuracy claim is +/-6%. |
| Stuck fasteners and added leverage | No | Do not use as a breaker bar or add leverage devices. |
LX-TW12 accepts a 1/2-inch square-drive socket directly. Wheel work also requires the vehicle maker's specified tightening torque to fall between 30 and 210 ft-lb, plus enough clearance for the 19.4-inch wrench.
LX-TW12 measures counterclockwise torque with a +/-6% accuracy claim, versus +/-4% clockwise. Follow the fastener maker's thread direction and torque specification within 30-210 ft-lb; a reversible socket alone does not determine the correct tightening direction.
250 ft-lb is above LX-TW12's 210 ft-lb ceiling. A nominal 1/2-inch drive does not expand the rated torque range. Choose a measuring tool whose interval includes the required 250 ft-lb.
LX-TW12 begins at 30 ft-lb, so 25 ft-lb is outside its interval. Use a lower-range wrench for that fastener, even if the 1/2-inch socket fits both tools.
LX-TW12 is 19.4 inches (49.3 cm) long. The grip measures 39 mm (1.53 inches) across its widest section. Allow room for your socket and hand movement; these nominal dimensions are not manufacturing tolerances.
A 3/8-inch square-drive socket will not attach directly to the LX-TW12 1/2-inch square drive. Choose a correct drive interface and fastener opening; any adapter arrangement must follow its own instructions and the equipment procedure.
LX-TW12 is a foot-pound and Nm tool: 30-210 ft-lb or 40.7-284.7 Nm. It is not the inch-pound LX-TW14. Confirm the unit on the equipment specification before combining the main and micrometer readings.
LX-TW12 uses a 1 ft-lb micrometer increment, approximately 1.36 Nm. Add the micrometer reading to the main scale in the unit required by the fastener specification.
210 ft-lb is LX-TW12's stated maximum setting. Stop immediately at the click or felt impulse at that setting; the top of the printed interval does not authorize continued force or a cheater pipe.
Clicks while adjusting the LX-TW12 handle are distinct from the torque impulse during tightening. Read and lock the setting, then stop at the first tightening signal instead of counting adjustment clicks as bolt torque.
Do not add leverage devices to LX-TW12 or use it to break free stuck fasteners. A 30-210 ft-lb rating is a measurement limit, not permission to extend the handle or use it as a breaker bar.
At the low end, the LX-TW12 click may be subtle and felt more than heard. Learn the impulse on a non-critical fastener. If there is no recognizable signal at 30 ft-lb, stop and seek assessment instead of tightening farther.
LX-TW12 uses 1/2-inch drive and spans 30-210 ft-lb; LX-TW38 uses 3/8-inch drive and spans 20-120 ft-lb. Both document measurement in both directions. Select the drive, torque limits and physical clearance for the job, rather than choosing only by case appearance.
LX-TW12 has 24 ratchet teeth. The quick-release button and reversible switch are separate head features; neither changes the tooth count or expands the measuring range.
LX-TW12 has a rubberized, bi-material rotating handle. Confirm any exact handle-diameter or foam-material requirement with Lexivon before purchase.
LX-TW12 is set by rotating its handle and locking collar and gives a mechanical impulse. The operation does not require a battery, charger or electronic display. Keep reading the dual scale rather than looking for a digital value.
LX-TW12 includes the 1/2-inch drive wrench, storage case, operator manual and calibration certificate. Select a socket that fits your fastener separately. Confirm the certificate date and validity required for controlled work before use.
Contact Lexivon promptly if LX-TW12 is missing from the registration list. They can assist with manual registration. Register within 90 days for lifetime defect coverage; without registration, standard coverage is 12 months. Commercial use remains 12 months, and industrial use is excluded.
For LX-TW12, turn the lock/unlock collar left to unlock, adjust the handle, then turn it right to lock. Use hand force and recheck the scale. This is a twisting lock, unlike the sliding collar on LX-180.
Stop using a loose or disassembled LX-TW12 and request assessment. Do not rely on tightening internal parts to restore calibration before further measured tightening.
Do not increase force just to make LX-TW12 audible. Verify the unit, locked setting and slow-pull method, recognizing a felt impulse at low torque. If the signal is still absent or unreliable, stop and ask Lexivon to assess the tool.
Store LX-TW12 at 30 ft-lb with micrometer zero aligned. Do not unwind below this minimum or try to remove all spring load.
Obtain the official LX-TW12 manual from Lexivon to review the collar, scales, operation and care. After extended storage, operate at low torque several times as instructed. A missing booklet is not a reason to try unknown adjustment procedures.
LX-TW12 lifetime eligibility does not include torque-wrench recalibration, normal wear, misuse, modifications or non-original parts. Coverage applies to defects. For a certificate-date requirement or an out-of-spec instrument, ask about assessment and calibration options separately.